
04:12
Summary
- Updates to Onshape Surfacing in 2026 let designers create, check, and refine surfaces in a cloud-native CAD system.
- G3 continuity now runs from the sketch Flow constraint through G2 Boundary surfaces to Connection Analysis.
- Surface deviation and reflection analysis verify fit and appearance, while more predictable curve editing and multi-surface trimming reduce the number of modeling steps.
In 2026, Onshape brought out some exciting enhancements for surfacing designers. It provided better ways not only to create surfaces, but to evaluate and prove their results are right.
Onshape introduced four curve-specific improvements that make it easier to create and edit. Two new surface-generation features arrived, along with optimizations to the quality of existing surface creation. Finally, the toolset for evaluating and validating the quality of the surfaces you create got a huge upgrade.
Let’s dive in and take a look at how the Onshape Surfacing toolset strengthened over 2026.
With Great Curves, Come Great Surfaces
Curves are the skeleton of a surface model. Broken bones don’t make for a structurally sound body, and the same is absolutely true in CAD. So, let’s start by looking at some improvements to curve generation in Onshape – the basis of defining our surfaces.
Starting with 2D curves in sketches, Onshape brought some impactful usability improvements to help you get it right, even when it’s “flat.”
Bezier curves have been around in Onshape for a bit, and are practically a cheat code for creating gorgeous surfaces. In 2026, though, a new capability lets you trim and split them without losing control.
Additionally, sketches now allow you to define a new Flow constraint, which creates G3 continuity, matching the rate of change of the curvature of two elements.
Sometimes you have to generate curves in 3D directly, and there is none better for it than Onshape’s Routing Curve feature. Routing Curves’ 2026 glow-up started with the ability to move multiple control points simultaneously for cleaner editing and manipulation.
Next, it received a defined target length parameter, allowing you to define the curve based on an outcome. Finally, it captures all your XYZ locations and bends in an automatic routing curve table.
Surface Creation Feature Improvements
There were several direct improvements to Onshape’s existing suite of Surface-specific features.
Boundary surfaces are ever popular for creating four-sided patches. Improvements to the algorithm behind the feature now produce higher-quality results the first time and greatly reduce “inconsistent boundary condition” warnings.
Additionally, two existing features picked up some “new moves” for 2026. Ruled surfaces can now be defined based on normal to a reference face, meaning projected and non-adjacent curves can be used, even when they don’t split the surface. Trimming surfaces also became easier thanks to an upgrade allowing the selection of multiple surfaces in mutual trim.
The goal of all three of these improvements is the same: more flexibility, reducing repetitive steps, and fewer workarounds while getting your job done.
Analyzing Your Work and Validating Quality
2026 brought a whole new toolset for surface quality and analysis. After all, you can only build surfaces as smooth as your tool lets you analyze.
Onshape started with a Connection analysis tool early in the year as a quick and visual way to evaluate Connection (G0), Tangency (G1), and Curvature continuity (G2) between two surfaces. This was then improved to support Flow continuity, or rate of change of curvature (G3), for Class-A surfacing and aesthetics work.
But what about checking when things DON’T match? Onshape introduced a Surface Deviation Analysis tool that provides a color-mapped visualization of how two surfaces match up and deviate.
Viewing the edges can be critical in evaluating surfaces, so Onshape provided new graphics options for visibility, many specifically for edges.
Finally, how can you actually tell how smooth a surface is without getting your hands on it? Since we have to use our eyes, it turns out that light – and its reflections – are a great way to do so.
Onshape introduced a new Reflection analysis tool that renders your model with a reflective material and an environment map, revealing subtle flaws that a standard view can hide. This went on to be improved to include orientation lock for closer inspection of detail areas and support for custom image libraries for your reflective environments.
Once you’ve used these powerful new tools to generate clean and flowing surfaces, you can truly validate that they’ve come out to be so.
New Surfacing Workflows, Always Current
Because Onshape is cloud-native, every designer works with the same continuously updated analysis and modeling tools, and with full version history to compare how a surface evolved. All of the improvements above reached everyone the moment they shipped.
Additionally, the Onshape Learning Center refreshed its Tips for High Quality Surfaces article with updated content, available in French, German, Japanese, simplified Chinese, and Spanish, so teams can learn these new features and build their skills alongside the new tools.
Try the Latest Surfacing Tools
Open a document, run a Connection or Reflection analysis on your latest surface, and see how the new tools fit your workflow. Share your feedback in the Onshape Forums and see the changelog for the complete list of updates.
The Onshape Discovery Program
Learn how qualified CAD professionals can get Onshape Professional for up to 6 months – at no cost!
Latest Content
- Case Study
- Education & Universities
Prompt to Prototype: How Tufts Engineering Capstone Students Collaborate Using Onshape
09.10.2026 learn more- Blog
- Evaluating Onshape
- Simulation
- Integrations
- Artificial Intelligence
From Prompt to Proven: AI-Driven Design and Simulation in One Workflow
11.12.2026 learn more- Blog
- Evaluating Onshape
- Artificial Intelligence
Is CAD Data Safe When AI Connects to Onshape?
11.04.2026 learn more- Blog
- Commercial (Pro/Standard)
- Startup
- Government (US)
- Robotics
- Evaluating Onshape
Why Robotics Companies Choose Cloud-Native CAD and PDM
11.05.2026 learn more