We have a big update for you this time around! Many of these improvements have been highly requested, so we hope you enjoy them. Let's jump in.
SHEET METAL TAB
Create tabs in sheet metal parts. You can create multiple tabs with a single feature and you can define a subtraction scope for subtracting tabs from other sheet metal parts.
VARIABLE FILLET
A new option in the Fillet command now allows you to create a fillet with a variable radius.
SIZED SHEET METAL CORNER AND BEND RELIEFS
You can now specify a size for sheet metal corner and bend reliefs. In the past, this was limited to a scale factor.
CUSTOMIZE TOOLBARS
You can now customize the toolbars in the Part Studio, Assembly, and Feature Studio environments.
NOTE IMPROVEMENTS
The Note command in Onshape Drawings can now be used to create both a normal Note and a Note with Leader. In the past, these were two separate commands.
PHANTOM TANGENT EDGES
You can now show tangent edges in drawing views as "Phantom" edges. This is particularly useful when the "Solid" display of tangent edges is too much detail.
DRAWING VIEW SECTION PERFORMANCE
Section Views in Onshape Drawings will now be cached. This should improve section view performance and lead to a noticeable decrease in load times of drawings with section views.